
34
34
RFDA-73M/RGB
3M
RF RGB
RF COLOR
RF SINGLE TERM 0-10V DC
WWW
TERM 0-10/1-10V DC
RF RGB
RF COLOR
RF SINGE
TERM 0-10V
TERM 1-10V
used to dim LEDs, an LED strip and RGB LED strip with power supply 12-24V DC
control is performed with RF Control wireless transmitters or signal 0-10V/ 1-10V, or iNELS DAC converter iNELS
The function (FUNC) selection switch enables setting of colored light scenes
upon switching o , the set level is stored in the memory, and when switched back on, it returns to the most
recently set value
the load for individual channels is 3x5A, which in practice enables dimming of approx. 60W = an 8m RGB LED strip
the supply voltage to the equipment and the LED strip must be the same. If the RFDA-73M/RGB is supplied by 12V
DC, LED strip / source should also be supplied by 12V DC. The same applies for a supply voltage of 24V DC
programming is performed button PROG located on the front panel of the device
supplied with internal antenna SMA (M)
optional accessories: external antenna AN-E.
More information on p. 45
Supply terminals:
Supply voltage:
Maximum power without load:
Output
Dimmed load:
Number of channels:
Rated current:
Peak current:
Switching voltage:
Controlling
RF by command from the transmitter:
Ext. signal:
Ext. signal:
Range in open space:
Load capacity of output +10V:
Further data
Operating temperature:
Storage temperature:
Working position:
Mounting:
Protection:
Contamination degree:
Cross-section of connecting wires (mm
2
):
Dimensions:
Weight:
Related standards:
Technical parameters
Un+, GND
12-24 V DC stabilized
0.8 W
LED strip 12V,24V with common anode
RGB LED strips 12V, 24V with common anode
3
3x5 A
3x10 A
Un
868 MHz
0-10 V, 1-10V
1-10 V
up to 160 m
10 mA
-20 up to + 50 °C
-30 up to + 70 °C
any
DIN rail EN 60715
IP 20 from front panel
2
max 1x2.5, max 2x1.5/ with a hollow max. 1x2.5
90 x 52 x 65 mm
130 g
EN 60730-1; EN 60730-2-11
!
!
!
!
!
!
!
!
!
Description of the device
EAN code
RFDA-73M/RGB: 8595188146814
External antenna AN-E: 859415759012
Internal antenna AN-I: 8595188161862
RF receiver: dimming actuator RFDA-73M/RGB
EXTERNAL ANTENNA AN-E
Description of function selection switch:
Control options
Color and brightness
preset for RF
Function selection
switch
Auxiliary voltage
output +10V
Green LED power supply
Inputs 0-10 / 1-10V controlling colors
Input 0-10 / 1-10V controlling overall brightness
Programming
button
RF antenna
Yellow LED STATUS
Outputs for load
connection
Voltage supply GND
Voltage supply Un+
Frequency of output PWM
Control options:
Output variations:
RGB strip
Single LED
Commentaires sur ces manuels